Having too much functions available in the WAIDPS, below are the list of commands available for WAIDPS for easier viewing. Hit on <Enter> to display [Command Selection Menu] on main screen.
Command Selection Menu
B About Application
C Application Configuration
0 / L Change Regulatory
* Enter Country Code (BO)
1 / R Refreshing rate of information
* Refresh detail after number of seconds (30)
2 / T Time before removing inactive AP/Station
H Hide AP/Station
* Number of minutes before hiding inactive AP/Station (1)
R Remove AP/Station
* Number of minutes before removing inactive AP/Station (120)
3 / H Hide inactive Access Point/Station
A Access Point
Y/n Hide inactive Access Point (Y)
S Station
Y/n Hide inactive Station (Y)
4 / B Beep if alert found
Y/n Beep if alert found (Y)
5 / S Sensitivity of IDS (Intrusion Detection System - Detection Sensitivity)
0 / D Display Current Setting
1 / H Highly Sensitive
2 / M Medium Sensitive
3 / L Low Sensitive
4 / C Custom setting of sensitivity
* Threshold for Data86
* Threshold for DataARP (ARP)
* Threshold for Data94
* Threshold for Data98
* Threshold for Association
* Threshold for Disassociation
* Threshold for Reassociation
* Threshold for Authentication
* Threshold for Deauthentication
* Threshold for Deauthentication (Aircrack-NG)
* Threshold for EAPOL Protocal
* Threshold for EAPOL Start
* Threshold for EAP Communication
* Threshold for Qos Data
* Threshold (Only in Analysis)
* Refresh Timeout Rate
6 / A Save Pcap when Attack detected
Y/n To save packets (Pcap) file if IDS detected an attack (Y)
7 / M Save Pcap when Monitored MAC/Name seen
y/N To save packets (Pcap) file if Harvestor found the specified MAC or ESSID
8 / W Whitelist Setting (Bypass alert for MAC/Name)
1 / M MAC Address [BSSID/STATION]
A Add MAC address
$ Specify the MAC Address to monitor (xx:xx:xx:xx:xx)
D Delete MAC Address
$ Specify the MAC Address to remove from list (xx:xx:xx:xx:xx)
C Clear all Monitoring Items
2 / N Name of Access Point / Probe Names
A Add ESSID/Probe Name
$ Enter the Name to Whitelist (Case sensitive)
D Delete MAC Address
$ Enter the Name to remove from the Whitelist (Case sensitive)
C Clear all Names from the Whitelist
9 / C Clear all Monitoring Items (MAC address & Names)
9 / D Dictionary Detail and Setting
1 / A Add dictionary location
$ Enter the location of the dictionary
2 / S Set default dictionary
$/* Enter the dictionary to be set as default (For cracking)
3 / D Delete dictionary location
$/* Enter the dictionary to be remove from dictionary listing
D Output Display
0 / H Hide both Access Points & Stations Listing Display
1 / A Display Access Points Listing Only
2 / S Display Station Listing Only
3 / B Display Both Access Points & Stations Listiong (Separated View
4 / P Advanced View with Probes Request (Merging associated Station with AP)
5 / O Advanced View without probing request (Merging associated Stations with AP)
6 / C Display one time bar chart of Access Points information
7 / N Show Association/Connection Alert (Toggle Yes/No)
8 / U Show Suspicious Activity Listing Alert (Toggle Yes/No)
9 / I Show Intrusion Detection/Attacks Alert (Toggle Yes/No)
+ / D Display client which associated with more than one access point
F Filter Network Display
1 / A Access Point
1 / E Encryption Type
$ Encryption Filter (WPA / WPA2 / WPA* / WEP / OPN / OTH / ALL)
2 / S Signal Range
1 / V VGood
2 / G Good
3 / A Average
4 / P Poor
5 / U Unknown
9 / X Clear Filter
3 / C Channel
* Enter the Channel to filter
4 / N Client
Y/N Display of Access Point with Clients (Yes/No)
5 / W WPS
Y/N Display only Access Point with WPS (Yes/No)
6 / I ESSID
$ Enter the ESSID to filter
7 / B BSSID
$ Enter the BSSID to filter
9 / X Clear Filter
2 / S Station / Client
1 / P Probes
Y/N Display only if station having probe name (Yes/No)
2 / S Signal Range
1 / V VGood
2 / G Good
3 / A Average
4 / P Poor
5 / U Unknown
9 / X Clear Filter
3 / A Associated Station
Y/N Display on if station associated (Yes/No)
4 / U Unassociated Station
Y/N Display on if station is not associated (Yes/No)
9 / X Clear Filter
3 / U Unassociated Station
1 / P Probes
Y/N Display only if unassociated station having probe name (Yes/No)
2 / S Signal Range
1 / V VGood
2 / G Good
3 / A Average
4 / P Poor
5 / U Unknown
9 / X Clear Filter
9 / X Clear Filter
H History Logs (Displaying Active Logs History)
1 / C Association / Connection Alert Log
2 / S Display Suspicious Activity Listing
3 / A Display Attack Log
4 / L Display Combination Logs (All Listing)
L Lookup MAC/Name Detail (Lookup BSSID / Station MAC / ESSID / Probes)
1 / M MAC Address
$ Enter the MAC to lookup for (xx:xx:xx:xx:xx:xx)
2 / N Names of Access Point / Probes
$ Enter the Name to lookup for
M Monitor MAC Address / Names (Adding MAC or Names to be monitoring list)
1 / M MAC Address
A Add MAC
$ Enter the MAC to be monitored (xx:xx:xx:xx:xx:xx)
D Delete MAC
$ Enter the MAC to be removed from monitoring list (xx:xx:xx:xx:xx:xx)
C Clear MAC (Remove all MAC addresses from the monitoring list)
2 / N Name of Access Point / Probe Names
A Add ESSID / Probe Name
$ Enter the ESSID / Probe Name to be added to the monitoring list
D Delete ESSID / Probe Name
$ Remove the ESSID / Probe Name from the monitoring list
C Clear Name (Remove all names from the monitoring list)
3 / L Live Monitoring of Access Point
$ Enter the Access Point MAC Address (BSSID) to monitor (xx:xx:xx:xx:xx:xx)
> Refer to Live Monitoring
9 / C Clear all Monitoring Items (MAC addresses & Names)
O Operation Options
0 / R Shutdown all interfaces and Restart application again
1 / P Probe Access Point Name (For probing on Hidden SSID)
$ Enter the ESSID to Probe
2 / N Refresh Now (Refresh current network harvesting process)
3 / S Restart application (All active listing will be cleared)
y/N Active listing will be cleared, are you sure you want to exit ? (N)
4 / T Restore all setting (All configuration will be reset, application will restart)
y/N All setting will be removed, are you sure (N)
A Auditing Network (Cracking of WEP/WPA/WPS or Live Monitoring of AP)
> Refer to Auditing Network
I Interactive Mode (Packet Analysis) - IDS
> Refer to Interactive Mode
P Intrusion Prevention - IPS
$ Enter the Attacker MAC Address (xx:xx:xx:xx:xx:xx) - Deauthing MAC address once detected trying to associated to access point.
* Enter the loopcount before IPS stop (9999999)
* Waiting time before sending another deauth signal (1)
X Exit Application
1 comment:
Harrah's Ak-Chin Casino and Hotel - Mapyro
Find your way around the casino, find where 통영 출장마사지 everything is 남양주 출장마사지 located with the help 안동 출장샵 of the hotel 속초 출장마사지 information. You'll find all information about 동해 출장안마 the property and
Post a Comment